Original file

Fiat Tipo Bosch ME17.3.0 0261S13701 / 10SW041090

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Tipo, hardware number 0261S13701 and software number 10SW041090, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo1.4 petrol 120PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S13701
Software number
10SW041090
Vehicle maker's hardware number
55273729
Software / calibration
1730A2004A1

Technical data

Vehicle
BrandFiat
Car modelTipo
Engine1.4 petrol 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S13701
Software number10SW041090
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye5b1dfc8be2565db
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S13701 / 10SW041090Offset in the file: 0x06715A / 0x08001A
Vehicle maker's hardware number55273729Offset in the file: 0x067175
Software / calibration1730A2004A1Offset in the file: 0x07FF08
Internal build string11B.14.00.00RBOffset in the file: 0x00E5A8
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730A2004A1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S13701 and software number 10SW041090. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart

All reads of 0261S13701 / 10SW041090

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1370110SW007372Fiat Tipo
0261S1370110SW011011Fiat Tipo
0261S1370110SW014333Fiat Tipo, Fiat Punto
0261S1370110SW039451Fiat Tipo
0261S1370110SW049650Fiat Tipo, Fiat Tipo/Egea
0261S1370110SW072046Fiat Tipo
0261S1378910SW013112Fiat Tipo
0261S1378910SW028929Jeep Wrangler

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page