Original file

Jeep Renegade Bosch ME17.3.0 0261S13931 / 10SW042751

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Jeep Renegade, hardware number 0261S13931 and software number 10SW042751, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegade1.4 · 150.0PS / 110.3kW
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S13931
Software number
10SW042751
Vehicle maker's hardware number
46343515
Software / calibration
1730S0305B3

Technical data

Vehicle
BrandJeep
Car modelRenegade
Engine1.4
FuelPetrol
Power150.0PS / 110.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S13931
Software number10SW042751
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key753c40fc15409c17
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S13931 / 10SW042751Offset in the file: 0x067BB6 / 0x08001A
Vehicle maker's hardware number46343515Offset in the file: 0x067BD1
Software / calibration1730S0305B3Offset in the file: 0x07FF08
Internal build string11B.14.00.00RBOffset in the file: 0x00E5A8
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730S0305B3///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S13931 and software number 10SW042751. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1370110SW049650Fiat Tipo, Fiat Tipo/Egea
0261S1370110SW072046Fiat Tipo
0261S1378910SW013112Fiat Tipo
0261S1378910SW028929Jeep Wrangler
0261S150481037552521Abarth 500 / 595 / 695
0261S150481037554106
0261S1504810SW000039Abarth 500, Abarth 500 / 595 / 695, Fiat
0261S1504810SW004733Fiat 500 / 595 / 695, Fiat 500, Fiat 595

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page