Original file

Fiat 500 Bosch ME17.3.0 0261S17572 / 010681

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S17572 and software number 010681, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 500
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S17572
Software number
010681
Bosch part / software
10SW010681
Vehicle maker's hardware number
55275939
Software / calibration
173072105B0

Technical data

Vehicle
BrandFiat
Car model500
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S17572
Software number010681
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW 500
File keyd29009666dbb85b5
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW010681Offset in the file: 0x08001A
Vehicle maker's hardware number55275939Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S17572 and software number 010681. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S17571010680Abarth 500
0261S175711037554106Abarth 500 / 595 / 695
0261S1757110SW010680Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S1757110SW012386Fiat 500 / 595 / 695, Fiat 500, Fiat 595 Abarth
0261S1757210SW010681Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1757210SW012387Fiat 500, Fiat 595 Abarth Pista BR PERFORMANCE
0261S1757310SW010678Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S175731755275940Fiat 595 Abarth

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page