Original file

Fiat 500 Bosch ME17.3.0 0261S17574 / 10SW010679

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S17574 and software number 10SW010679, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 petrol 165PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S17574
Software number
10SW010679
Vehicle maker's hardware number
55275941
Software / calibration
173072105B0

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4 petrol 165PS
Power165.0PS / 121.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S17574
Software number10SW010679
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key2acad042fc837cb8
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW010679Offset in the file: 0x08001A
Vehicle maker's hardware number55275941Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S17574 and software number 10SW010679. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat 500 AbarthFlash2,048.00 KB€15Add to cart
Fiat 595 CompetizioneFlash1,536.00 KB€15Add to cart
Abarth 500 / 595 / 695Flash1,536.00 KB€15Add to cart

All reads of 0261S17574 / 10SW010679

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1757210SW010681Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1757210SW012387Fiat 500, Fiat 595 Abarth Pista BR PERFORMANCE
0261S1757310SW010678Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S175731755275940Fiat 595 Abarth
0261S21004039955Fiat
0261S2100510SW042645Alfa Romeo Giulietta
0261S2100510SW044632Alfa Romeo Giulietta
0261S2100610SW040298Fiat Dolbo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page