Original file

Fiat 500 Bosch ME17.3.0 0261S21008 / 10SW044424

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S21008 and software number 10SW044424, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 petrol 160PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S21008
Software number
10SW044424
Vehicle maker's hardware number
46341574
Software / calibration
1730E2105A0

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4 petrol 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S21008
Software number10SW044424
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya4e77352153af9b4
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S21008 / 10SW044424Offset in the file: 0x063DD2 / 0x08001A
Vehicle maker's hardware number46341574Offset in the file: 0x063DED
Software / calibration1730E2105A0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E2105A0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21008 and software number 10SW044424. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat Abarth PistaFlash2,048.00 KB€15Add to cart
Abarth 500Flash2,048.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat Abarth PistaFlash1,536.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat 500Flash2,048.00 KB€15Add to cart

All reads of 0261S21008 / 10SW044424

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S2100610SW040298Fiat Dolbo
0261S2100810SW038752Fiat 500 Abarth, Fiat 595 Abarth, Fiat 500 / 595 / 695
0261S2100810SW040515Fiat 500 / 595 / 695, Fiat 500, Fiat 595 Abarth
0261S2100810SW044422Fiat 500, Fiat 595 Abarth, Fiat Pista
0261S21009044426Fiat 500
0261S210091037040248Fiat Abarth 595 Turismo TB
0261S2100910SW040248Fiat Abarth, Fiat 500, Fiat 595 Abarth
0261S2100910SW044426Fiat 595 Abarth, Fiat 500, Fiat 500 Abarth

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page