Original file

Fiat Abarth Bosch ME17.3.0 0261S21010 / 10SW044430

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Abarth, hardware number 0261S21010 and software number 10SW044430, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Abarth1.4 petrol 165PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S21010
Software number
10SW044430
Vehicle maker's hardware number
46344315
Software / calibration
1730E2105A0

Technical data

Vehicle
BrandFiat
Car modelAbarth
Engine1.4 petrol 165PS
Power165.0PS / 121.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S21010
Software number10SW044430
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keya585e71bc07c1f1d
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S21010 / 10SW044430Offset in the file: 0x063DD2 / 0x08001A
Vehicle maker's hardware number46344315Offset in the file: 0x063DED
Software / calibration1730E2105A0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E2105A0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21010 and software number 10SW044430. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat Abarth 595 PistaFlash1,536.00 KB€15Add to cart
FiatFlash2,048.00 KB€15Add to cart

All reads of 0261S21010 / 10SW044430

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S210091037040248Fiat Abarth 595 Turismo TB
0261S2100910SW040248Fiat Abarth, Fiat 500, Fiat 595 Abarth
0261S2100910SW044426Fiat 595 Abarth, Fiat 500, Fiat 500 Abarth
0261S2101010SW040258Fiat 595 Abarth, Fiat 500 / 595 / 695, Fiat 595
0261S2101110SW040239Fiat 500 / 595 / 695, Fiat 595 Abarth, Fiat 500
0261S2101110SW044427Fiat 500, Fiat Abarth 595, Fiat 500 / 595 / 695
0261S21012040244Fiat Abarth 500
0261S2101210SW040244Fiat 500 / 595 / 695

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page