Original file

Abarth 595 Bosch ME17.3.0 10SW071916

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Abarth 595, software number 10SW071916, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Abarth 595165PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Software number
10SW071916
Vehicle maker's hardware number
46351483
Software / calibration
1730E2109B1

Technical data

Vehicle
BrandAbarth
Car model595
Engine165PS
Power165.0PS / 121.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Software number10SW071916
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
From the file nameL533CC0
File key25d1812b28684464
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW071916Offset in the file: 0x08001A
Vehicle maker's hardware number46351483Offset in the file: 0x063EE5
Software / calibration1730E2109B1Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E2109B1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW071916. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
070464Fiat 595 Competizione
10SW072069Abarth 500 / 595 / 695
0261S07817529104Fiat 500
0261S078291037531187Fiat Ottimo
0261S078291037551050Fiat Viaggio
0261S082481037551051Fiat Ottimo
0261S082491037531186Fiat Viaggio, Fiat 500 Abarth
0261S082491037537425Fiat Viaggio

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page