Original file
Abarth 500 / 595 / 695 Bosch ME17.3.0 10SW072069
An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Abarth 500 / 595 / 695, software number 10SW072069, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Abarth 500 / 595 / 6951.4 petrol 180PS
- Control unit
- Bosch ME17.3.0
- Read type
- OBD read (no boot area)
- File
- 2,048.00 KB · Flash
- Software number
- 10SW072069
- Vehicle maker's hardware number
- 46351650
- Software / calibration
- 1730E2109B1
Technical data
| Brand | Abarth |
|---|---|
| Car model | 500 / 595 / 695 |
| Engine | 1.4 petrol 180PS |
| Power | 180.0PS / 132.4kW |
| Control unit | Bosch ME17.3.0 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW072069 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 5803939d8557c3fd |
| ECU name | ME17.3.0 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1724 | |
| Bosch part / software | 10SW072069 | Offset in the file: 0x08001A |
| Vehicle maker's hardware number | 46351650 | Offset in the file: 0x063EE5 |
| Software / calibration | 1730E2109B1 | Offset in the file: 0x07FF08 |
| Internal build string | 11B.08.03.00RB | Offset in the file: 0x00E354 |
| Bosch project identifier (EPK) | 35/1/MED17/9/ME1730//1730E2109B1/// | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW072069. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.3.0
| Hardware | Software | Vehicles |
|---|---|---|
| 070464 | Fiat 595 Competizione | |
| 10SW071916 | Abarth 595 | |
| 0261S07817 | 529104 | Fiat 500 |
| 0261S07829 | 1037531187 | Fiat Ottimo |
| 0261S07829 | 1037551050 | Fiat Viaggio |
| 0261S08248 | 1037551051 | Fiat Ottimo |
| 0261S08249 | 1037531186 | Fiat Viaggio, Fiat 500 Abarth |
| 0261S08249 | 1037537425 | Fiat Viaggio |