Original file

Jeep Renegade Bosch ME17.3 0261S13931 / 10SW030368

An original (stock) flash read of the Bosch ME17.3 control unit, fitted in Jeep Renegade, hardware number 0261S13931 and software number 10SW030368, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegade1.4 diesel 150PS
Control unit
Bosch ME17.3
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S13931
Software number
10SW030368
Vehicle maker's hardware number
55279468
Software / calibration
1730S0305B3

Technical data

Vehicle
BrandJeep
Car modelRenegade
Engine1.4 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch ME17.3
ECU makerBosch
Hardware number0261S13931
Software number10SW030368
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key09cf975e3b2a8cb0
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
Bosch part / software0261S13931 / 10SW030368Offset in the file: 0x067BB6 / 0x02001A
Vehicle maker's hardware number55279468Offset in the file: 0x067BD1
Software / calibration1730S0305B3Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730S0305B3///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S13931 and software number 10SW030368. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jeep RenegadeFlash2,048.00 KB€15Add to cart

All reads of 0261S13931 / 10SW030368

Other pairs of Bosch ME17.3

HardwareSoftwareVehicles
0261S175711037010680

Bosch ME17.3 original files