Original file

Volkswagen UP! Bosch ME17.5.20 04C907309 / 1037538181

An original (stock) flash read of the Bosch ME17.5.20 control unit, fitted in Volkswagen UP!, hardware number 04C907309 and software number 1037538181, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen UP!1.0 petrol 60PS
Control unit
Bosch ME17.5.20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04C907309
Software number
1037538181
Software / calibration
04C906020

Technical data

Vehicle
BrandVolkswagen
Car modelUP!
Engine1.0 petrol 60PS
Power60.0PS / 44.1kW
Control unit
Control unitBosch ME17.5.20
ECU makerBosch
Hardware number04C907309
Software number1037538181
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye99c2ba0814a2be2
Identification read from the file
ECU nameME17.5.20
Read typeFull read (boot area included)
Bosch part / software1037538181Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309Offset in the file: 0x1D7AC4
Software / calibration04C906020 · version 6462Offset in the file: 0x1D7ADE
Internal build stringMED17 CB.06.01.04Offset in the file: 0x00E5BE
Bosch project identifier (EPK)51/1/MED17/3/ME17.5.20//S1752V03C000_M18F76/Dst00//Offset in the file: 0x1BFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309 and software number 1037538181. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen UP!Flash2,048.00 KB€15Add to cart
Volkswagen UP!Flash2,048.00 KB€15Add to cart
Volkswagen UP!Flash2,048.00 KB€15Add to cart

All reads of 04C907309 / 1037538181

Other pairs of Bosch ME17.5.20

HardwareSoftwareVehicles
04C906020T1037538201Volkswagen pcmflash
04C9073091037522112Volkswagen UP!
04C9073091037527689Volkswagen
04C9073091037532242Seat
04C907309A1037527679Volkswagen UP!
04C907309A1037532244Volkswagen Up!
04C907309A1037538191Volkswagen UP!, Volkswagen Up
04C907309A1037538192Volkswagen Up

Bosch ME17.5.20 original files