Original file

Volkswagen UP! Bosch ME17.5.24 04C906020EN / 1037537089

An original (stock) flash read of the Bosch ME17.5.24 control unit, fitted in Volkswagen UP!, hardware number 04C906020EN and software number 1037537089, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen UP!1.0 petrol 60PS
Control unit
Bosch ME17.5.24
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
04C906020EN
Software number
1037537089
Bosch part / software
10SW009060
Vehicle maker's hardware number
04C907309P

Technical data

Vehicle
BrandVolkswagen
Car modelUP!
Engine1.0 petrol 60PS
Power60.0PS / 44.1kW
Control unit
Control unitBosch ME17.5.24
ECU makerBosch
Hardware number04C906020EN
Software number1037537089
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key1369520dad1928d6
Identification read from the file
ECU nameME17.5.24
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software10SW009060Offset in the file: 0x04001A
Vehicle maker's hardware number04C907309POffset in the file: 0x03A114
Software / calibration04C906020EN · version 3171Offset in the file: 0x03A12E
Internal build stringMED17 CB.04.04.00Offset in the file: 0x00F054
Bosch project identifier (EPK)38/1/MED17/3///S17524V03C000_M24D31///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.24 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C906020EN and software number 1037537089. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.24

HardwareSoftwareVehicles
04C906020EM04C906020EMVolkswagen UP!
04C906020EM1037537091Škoda Citigo, Škoda Up!, Škoda Mii
04C906020EM10SW009057Volkswagen Up!, Volkswagen Citigo, Škoda
04C906020EN04C907309PVolkswagen UP!
04C906020EN10SW009060Volkswagen Up!, Volkswagen pcmflash, Volkswagen UP!
04C906020FA10SW030386Volkswagen pcmflash
04C907309AB1037545861Volkswagen
04C907309AB1037546696Volkswagen

Bosch ME17.5.24 original files