Original file

Seat Ibiza 1.0i Bosch ME17.5.26 04C907309J / 003490

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Seat Ibiza 1.0i, hardware number 04C907309J and software number 003490, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ibiza 1.0i1.0 petrol 75.0PS / 55.2kW
Control unit
Bosch ME17.5.26
Read type
Calibration only (data set)
File
1,536.00 KB · Flash
Hardware number
04C907309J
Software number
003490
Bosch part / software
10SW003490
Software / calibration
04C906057

Technical data

Vehicle
BrandSeat
Car modelIbiza 1.0i
Engine1.0 petrol 75.0PS / 55.2kW
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04C907309J
Software number003490
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyd8df751657783703
Identification read from the file
ECU nameME17.5.26
Read typeCalibration only (data set)
Bosch part / software10SW003490Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309JOffset in the file: 0x037C30
Software / calibration04C906057 · version 9076Offset in the file: 0x037C4A
Bosch project identifier (EPK)38/1/MED17/3///S17526V01C000_M24E02///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309J and software number 003490. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04C907309BE10SW030032Seat Ibiza
04C907309BE10SW030033Seat
04C907309BJ04C907309BJSeat Fabia, Seat Ibiza, Škoda
04C907309BJ10SW045952Škoda Fabia
04C907309J04C906057Volkswagen Polo
04C907309J04C907309JVolkswagen Polo
04C907309J1037543577Volkswagen Polo
04C907309J1037543579Volkswagen Polo

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page