Original file

Volkswagen Polo Bosch ME17.5.26 04C907309J / 04C907309J

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Volkswagen Polo, hardware number 04C907309J and software number 04C907309J, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.0 · 75.0PS / 55.2kW
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04C907309J
Software number
04C907309J
Bosch part / software
10SW003488
Software / calibration
04C906057A

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.0
FuelPetrol
Power75.0PS / 55.2kW
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04C907309J
Software number04C907309J
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5576ebb11b005262
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW003488Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309JOffset in the file: 0x037C30
Software / calibration04C906057A · version 9077Offset in the file: 0x037C4A
Bosch project identifier (EPK)38/1/MED17/3///S17526V01C000_M24E02///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309J and software number 04C907309J. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04C907309BJ04C907309BJSeat Fabia, Seat Ibiza, Škoda
04C907309BJ10SW045952Škoda Fabia
04C907309J003490Seat Ibiza 1.0i
04C907309J04C906057Volkswagen Polo
04C907309J1037543577Volkswagen Polo
04C907309J1037543579Volkswagen Polo
04C907309J1037546753Volkswagen Polo, Volkswagen Fabia, Škoda
04C907309J1037546755Volkswagen Polo

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page