Original file

Bosch ME17.5.26 04C907309J / 1037550889

An original (stock) flash read of the Bosch ME17.5.26 control unit, hardware number 04C907309J and software number 1037550889, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
04C907309J
Software number
1037550889
Software / calibration
04C906057L

Technical data

Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04C907309J
Software number1037550889
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyc6b503f6ca8bc304
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software1037550889Offset in the file: 0x04001A
Vehicle maker's hardware number04C907309JOffset in the file: 0x037C08
Software / calibration04C906057L · version 8335Offset in the file: 0x037C22
Internal build stringMED17 CB.04.04.00Offset in the file: 0x00F054
Bosch project identifier (EPK)38/1/MED17/3///S17526V01C000_M24E01///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309J and software number 1037550889. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04C907309J1037546753Volkswagen Polo, Volkswagen Fabia, Škoda
04C907309J1037546755Volkswagen Polo
04C907309J1037546764Volkswagen Polo
04C907309J1037550290Volkswagen Polo
04C907309J1037552097Volkswagen Polo 1.0i, Volkswagen Ibiza, Seat
04C907309J1037552099Škoda Polo, Škoda Fabia 3 1.0 MPI, Škoda Fabia
04C907309J10SW003488Seat
04C907309J10SW003490Volkswagen Polo

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page