Original file

Seat Ibiza Bosch ME17.5.26 04E907309CB / 003260

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Seat Ibiza, hardware number 04E907309CB and software number 003260, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ibizapetrol 0.0PS / 0.0kW
Control unit
Bosch ME17.5.26
Read type
Calibration only (data set)
File
1,536.00 KB · Flash
Hardware number
04E907309CB
Software number
003260
Bosch part / software
10SW003260
Software / calibration
04C906057AB

Technical data

Vehicle
BrandSeat
Car modelIbiza
Enginepetrol 0.0PS / 0.0kW
Displacement1.0
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CB
Software number003260
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyd469a07de7c3c243
Identification read from the file
ECU nameME17.5.26
Read typeCalibration only (data set)
Bosch part / software10SW003260Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309CBOffset in the file: 0x03832C
Software / calibration04C906057AB · version 2496Offset in the file: 0x038346
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24F00///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CB and software number 003260. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04E907309AH10SW005011Volkswagen
04E907309AL10SW009332Volkswagen
04E907309AL10SW009333Volkswagen
04E907309AL10SW011712Volkswagen
04E907309CB003261Volkswagen Polo 1.0 MPI
04E907309CB004984Škoda Fabia 2
04E907309CB005029Škoda Fabia 3 1.0 MPI
04E907309CB04C906057AAŠkoda Fabia 2

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page