Original file

Volkswagen Polo 1.0 MPI Bosch ME17.5.26 04E907309CB / 003261

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Volkswagen Polo 1.0 MPI, hardware number 04E907309CB and software number 003261, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo 1.0 MPI1.0 petrol 69.0PS / 50.7kW
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04E907309CB
Software number
003261
Bosch part / software
10SW003261
Software / calibration
04C906057AA

Technical data

Vehicle
BrandVolkswagen
Car modelPolo 1.0 MPI
Engine1.0 petrol 69.0PS / 50.7kW
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CB
Software number003261
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key083e17535a9b1b46
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW003261Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309CBOffset in the file: 0x03832C
Software / calibration04C906057AA · version 2495Offset in the file: 0x038346
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24F00///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CB and software number 003261. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04E907309AL10SW009332Volkswagen
04E907309AL10SW009333Volkswagen
04E907309AL10SW011712Volkswagen
04E907309CB003260Seat Ibiza
04E907309CB004984Škoda Fabia 2
04E907309CB005029Škoda Fabia 3 1.0 MPI
04E907309CB04C906057AAŠkoda Fabia 2
04E907309CB04E907309CBSeat Mii

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page