Original file

Volkswagen Polo Bosch ME17.5.26 04E907309CB / 10SW003261

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Volkswagen Polo, hardware number 04E907309CB and software number 10SW003261, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.0 petrol 65PS
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
04E907309CB
Software number
10SW003261
Software / calibration
04C906057AA

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.0 petrol 65PS
Power65.0PS / 47.8kW
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CB
Software number10SW003261
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key66034e64e48ac1b9
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software10SW003261Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309CBOffset in the file: 0x03832C
Software / calibration04C906057AA · version 2495Offset in the file: 0x038346
Internal build stringMED17 CB.04.04.00Offset in the file: 0x00F054
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24F00///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CB and software number 10SW003261. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
FlashFlash2,048.00 KB€15Add to cart
Volkswagen PoloFlash2,048.00 KB€15Add to cart

All reads of 04E907309CB / 10SW003261

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04E907309CB005029Škoda Fabia 3 1.0 MPI
04E907309CB04C906057AAŠkoda Fabia 2
04E907309CB04E907309CBSeat Mii
04E907309CB1037556749Volkswagen Polo
04E907309CB10SW004961Seat
04E907309CB10SW004984Seat Ibiza
04E907309CB10SW005029Škoda Fabia 3
04E907309CP10SW026891Seat Leon

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page