Original file

Volkswagen Bosch ME17.5 0261S21144 / 10SW042548

An original (stock) flash read of the Bosch ME17.5 control unit, fitted in Volkswagen, hardware number 0261S21144 and software number 10SW042548, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen
Control unit
Bosch ME17.5
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S21144
Software number
10SW042548
Vehicle maker's hardware number
07K907309B
Software / calibration
07K906055EK

Technical data

Vehicle
BrandVolkswagen
Control unit
Control unitBosch ME17.5
ECU makerBosch
Hardware number0261S21144
Software number10SW042548
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6bd72c2b3328709c
Identification read from the file
ECU nameME17.5.6
Read typeFull read (boot area included)
Bosch part / software0261S21144 / 10SW042548Offset in the file: 0x0605B2 / 0x08001A
Vehicle maker's hardware number07K907309BOffset in the file: 0x0605C8
Software / calibration07K906055EK · version 6508Offset in the file: 0x0605D4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EFAE
Bosch project identifier (EPK)46/1/MED17/3/S17563xR//S175631R_M20A10/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21144 and software number 10SW042548. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5

HardwareSoftwareVehicles
0261S049281037532995Volkswagen
0261S049291037532994Volkswagen
0261S049301037504539Volkswagen Golf
0261S049301037537542Volkswagen
04E906057A1037537333Volkswagen pcmflash
04E906057B1037537334Volkswagen pcmflash
04E906057C1037537335Volkswagen pcmflash
04E906057D1037537336Volkswagen pcmflash

Bosch ME17.5 original files

The Bosch ME17.5 unit page