Original file
McLaren 650S Bosch ME17.8.3.2 MED17.9.7 S17832_9744P13__731_0
An original (stock) flash read of the Bosch ME17.8.3.2 MED17.9.7 control unit, fitted in McLaren 650S, hardware number S17832_9744P13__731_0, 3,712.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- McLaren 650S3.8 petrol 650PS
- Control unit
- Bosch ME17.8.3.2 MED17.9.7
- Read type
- Full read (boot area included)
- File
- 3,712.00 KB · Flash
- Hardware number
- S17832_9744P13__731_0
Technical data
| Brand | McLaren |
|---|---|
| Car model | 650S |
| Engine | 3.8 petrol 650PS |
| Power | 650.0PS / 478.1kW |
| Control unit | Bosch ME17.8.3.2 MED17.9.7 |
|---|---|
| ECU maker | Bosch |
| Hardware number | S17832_9744P13__731_0 |
| File type | Original flash read |
|---|---|
| File size | 3,712.00 KB (3,801,088 bytes) |
| File key | a25a7c82211367cb |
| ECU name | ME17.8.3.2 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Software / calibration | S17832_9744P13__731_0 | Offset in the file: 0x17FF08 |
| Internal build string | ME17.8.3/UDS1.41 | Offset in the file: 0x0095F4 |
| Bosch project identifier (EPK) | 57/1/MED17/9744/ME17.8.3.2//S17832_9744P13__731_0/Dst00// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.8.3.2 MED17.9.7 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number S17832_9744P13__731_0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.