Original file

McLaren 675LT Bosch ME17.8.3 009264

An original (stock) flash read of the Bosch ME17.8.3 control unit, fitted in McLaren 675LT, software number 009264, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
McLaren 675LT3.8 · 675.0PS / 496.5kW
Control unit
Bosch ME17.8.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
009264
Bosch part / software
10SW009264
Software / calibration
S17832_9744PGR__1201_0

Technical data

Vehicle
BrandMcLaren
Car model675LT
Engine3.8
FuelPetrol
Power675.0PS / 496.5kW
Control unit
Control unitBosch ME17.8.3
ECU makerBosch
Software number009264
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key18d218dbde7cda46
Identification read from the file
ECU nameME17.8.3
Read typeCalibration only (data set)
Bosch part / software10SW009264Offset in the file: 0x18001A
Software / calibrationS17832_9744PGR__1201_0Offset in the file: 0x1BFF08
Bosch project identifier (EPK)45/1/ME17832/9744///S17832_9744PGR__1201_0///Offset in the file: 0x1BFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 009264. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.3

HardwareSoftwareVehicles
000354McLaren 570s
016516McLaren 570S
1037513982McLaren MP4-12C, McLaren Mp4-12C, McLaren XP2
1037521918McLaren MP4-12C, Mclaren, McLaren 650S
1037537601McLaren MP4-12C
1037544105McLaren 650S ALLCAR RACING
1037548838McLaren 570S
10SW000354McLaren 570GT, McLaren 540C, McLaren 570S

Bosch ME17.8.3 original files