Original file

McLaren 650S Bosch ME17.8.32 0261S08157 / 10SW003182

An original (stock) flash read of the Bosch ME17.8.32 control unit, fitted in McLaren 650S, hardware number 0261S08157 and software number 10SW003182, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
McLaren 650S3.8 petrol 650PS
Control unit
Bosch ME17.8.32
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S08157
Software number
10SW003182
Software / calibration
S17832_9744P13__731_0

Technical data

Vehicle
BrandMcLaren
Car model650S
Engine3.8 petrol 650PS
Power650.0PS / 478.1kW
Control unit
Control unitBosch ME17.8.32
ECU makerBosch
Hardware number0261S08157
Software number10SW003182
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfb05de6a521028d9
Identification read from the file
ECU nameME17.8.3.2
Read typeCalibration only (data set)
Bosch part / software10SW003182Offset in the file: 0x18001A
Software / calibrationS17832_9744P13__731_0Offset in the file: 0x1BFF08
Bosch project identifier (EPK)62/1/MED17/9744/ME17.8.3.2//S17832_9744P13__731_0/731002E002//Offset in the file: 0x1BFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08157 and software number 10SW003182. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.32

HardwareSoftwareVehicles
10SW053238McLaren 600 LT, McLaren 600LT
016518026110SW016518McLaren 570GT
0261S081571037521918McLaren Sports Series
0261S081571037537601McLaren MP4-12C
0261S0815710SW000354McLaren 570s
042496026110SW042496McLaren 600LT
11M2566CP.041037544156McLaren MP4-12C
11M2569CP.05.1037521918McLaren MP4-12C

Bosch ME17.8.32 original files

The Bosch ME17.8.32 unit page