Original file
Can-Am Renegade Bosch ME17.8.5 10SW036680
An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Can-Am Renegade, software number 10SW036680, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Can-Am Renegade1.0 petrol 85PS
- Control unit
- Bosch ME17.8.5
- Read type
- Full read (boot area included)
- File
- 1,024.00 KB · Flash
- Software number
- 10SW036680
- Software / calibration
- 7E5169O
Technical data
| Brand | Can-Am |
|---|---|
| Car model | Renegade |
| Engine | 1.0 petrol 85PS |
| Power | 85PS / 62.5kW |
| Control unit | Bosch ME17.8.5 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW036680 |
| File type | Original flash read |
|---|---|
| File size | 1,024.00 KB (1,048,576 bytes) |
| File key | 6012e30bc7eaa281 |
| Read type | Full read (boot area included) | |
|---|---|---|
| Bosch part / software | 10SW036680 | Offset in the file: 0x02001A |
| Software / calibration | 7E5169O | Offset in the file: 0x03FE10 |
| Bosch project identifier (EPK) | 30/1/MED17////7E5169O/F3RAS1// | Offset in the file: 0x03FE10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW036680. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.8.5
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW011349 | Sea-Doo GTI | |
| 10SW030546 | Can-Am Outlander | |
| 10SW035676 | Can-Am Traxter/Defender | |
| 10SW036310 | Can-Am Maveric | |
| 10SW053279 | Can-Am Traxter | |
| 10SW055072 | Can-Am UTV | |
| 10SW081196 | Can-Am Outlander | |
| 10SW092996 | Can-Am Outlander |