Original file

Can-Am Outlander Bosch ME17.8.5 10SW081196

An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Can-Am Outlander, software number 10SW081196, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Can-Am Outlanderpetrol 81PS
Control unit
Bosch ME17.8.5
Read type
Calibration only (data set)
File
1,024.00 KB · Flash
Software number
10SW081196
Software / calibration
7E5193N

Technical data

Vehicle
BrandCan-Am
Car modelOutlander
Enginepetrol 81PS
Power81.0PS / 59.6kW
Control unit
Control unitBosch ME17.8.5
ECU makerBosch
Software number10SW081196
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key0e288aeb89a39e9f
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software10SW081196Offset in the file: 0x02001A
Software / calibration7E5193NOffset in the file: 0x03FE10
Bosch project identifier (EPK)30/1/MED17////7E5193N/F3VXS2//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW081196. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.5

HardwareSoftwareVehicles
10SW036310Can-Am Maveric
10SW036680Can-Am Renegade
10SW053279Can-Am Traxter
10SW055072Can-Am UTV
10SW092996Can-Am Outlander
01515619271037524060Sea-Doo
5240601037524060Sea-Doo RXT-X
7A1124NA0RDS21037521129Sea-Doo RXP-X

Bosch ME17.8.5 original files

The Bosch ME17.8.5 unit page