Original file
Can-Am Outlander Bosch ME17.8.5 10SW092996
An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Can-Am Outlander, software number 10SW092996, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Can-Am Outlanderpetrol 62PS
- Control unit
- Bosch ME17.8.5
- Read type
- Calibration only (data set)
- File
- 1,024.00 KB · Flash
- Software number
- 10SW092996
- Software / calibration
- 7E5195N
Technical data
| Brand | Can-Am |
|---|---|
| Car model | Outlander |
| Engine | petrol 62PS |
| Displacement | 0.7 |
| Power | 62.0PS / 45.6kW |
| Control unit | Bosch ME17.8.5 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW092996 |
| File type | Original flash read |
|---|---|
| File size | 1,024.00 KB (1,048,576 bytes) |
| File key | 10cbceee43f6b259 |
| Read type | Calibration only (data set) | |
|---|---|---|
| Bosch part / software | 10SW092996 | Offset in the file: 0x02001A |
| Software / calibration | 7E5195N | Offset in the file: 0x03FE10 |
| Bosch project identifier (EPK) | 30/1/MED17////7E5195N/F4VXS1// | Offset in the file: 0x03FE10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW092996. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.8.5
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW036680 | Can-Am Renegade | |
| 10SW053279 | Can-Am Traxter | |
| 10SW055072 | Can-Am UTV | |
| 10SW081196 | Can-Am Outlander | |
| 0151561927 | 1037524060 | Sea-Doo |
| 524060 | 1037524060 | Sea-Doo RXT-X |
| 7A1124NA0RDS2 | 1037521129 | Sea-Doo RXP-X |
| 7A1124OA0RDS1 | 1037524060 | Sea-Doo RXP-X |