Original file

Sea-Doo RXT-X Bosch ME17.8.5 524060 / 1037524060

An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Sea-Doo RXT-X, hardware number 524060 and software number 1037524060, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Sea-Doo RXT-X1.5 petrol 260PS
Control unit
Bosch ME17.8.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
524060
Software number
1037524060
Software / calibration
VM7A170124B0

Technical data

Vehicle
BrandSea-Doo
Car modelRXT-X
Engine1.5 petrol 260PS
Power260.0PS / 191.2kW
Control unit
Control unitBosch ME17.8.5
ECU makerBosch
Hardware number524060
Software number1037524060
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key0c24ba79c6e001dc
Identification read from the file
Read typeFull read (boot area included)
Bosch part / software1037524060Offset in the file: 0x04001A
Software / calibrationVM7A170124B0Offset in the file: 0x0FFE10
Internal build stringPLATFORM VM_CB.04.80.00Offset in the file: 0x012C58
Bosch project identifier (EPK)30/1/MED17////7A1124O/A0RDS1//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 524060 and software number 1037524060. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.5

HardwareSoftwareVehicles
10SW055072Can-Am UTV
10SW081196Can-Am Outlander
10SW092996Can-Am Outlander
01515619271037524060Sea-Doo
7A1124NA0RDS21037521129Sea-Doo RXP-X
7A1124OA0RDS11037524060Sea-Doo RXP-X
7A1128RA8FOS51037525858Sea-Doo Spark
7A1150QC7FOS41037550003Sea-Doo RXP

Bosch ME17.8.5 original files

The Bosch ME17.8.5 unit page