Original file

Sea-Doo RXP-X Bosch ME17.8.5 7A1124NA0RDS2 / 1037521129

An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Sea-Doo RXP-X, hardware number 7A1124NA0RDS2 and software number 1037521129, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Sea-Doo RXP-X1.5 petrol 260PS
Control unit
Bosch ME17.8.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
7A1124NA0RDS2
Software number
1037521129
Software / calibration
7A1124N

Technical data

Vehicle
BrandSea-Doo
Car modelRXP-X
Engine1.5 petrol 260PS
Power260.0PS / 191.2kW
Control unit
Control unitBosch ME17.8.5
ECU makerBosch
Hardware number7A1124NA0RDS2
Software number1037521129
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya7797b0a77365158
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037521129Offset in the file: 0x02001A
Software / calibration7A1124NOffset in the file: 0x03FE10
Bosch project identifier (EPK)30/1/MED17////7A1124N/A0RDS2//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7A1124NA0RDS2 and software number 1037521129. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.5

HardwareSoftwareVehicles
10SW081196Can-Am Outlander
10SW092996Can-Am Outlander
01515619271037524060Sea-Doo
5240601037524060Sea-Doo RXT-X
7A1124OA0RDS11037524060Sea-Doo RXP-X
7A1128RA8FOS51037525858Sea-Doo Spark
7A1150QC7FOS41037550003Sea-Doo RXP
7E5169OF4VVS210SW039513Can-Am Outlander

Bosch ME17.8.5 original files

The Bosch ME17.8.5 unit page