Original file

Can-Am Outlander Bosch ME17.8.5 7E5169OF4VVS2 / 10SW039513

An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Can-Am Outlander, hardware number 7E5169OF4VVS2 and software number 10SW039513, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Can-Am Outlander0.6 petrol 48PS
Control unit
Bosch ME17.8.5
Read type
Full read (boot area included)
File
1,024.00 KB · Flash
Hardware number
7E5169OF4VVS2
Software number
10SW039513
Software / calibration
7E5169O

Technical data

Vehicle
BrandCan-Am
Car modelOutlander
Engine0.6 petrol 48PS
Power48.0PS / 35.3kW
Control unit
Control unitBosch ME17.8.5
ECU makerBosch
Hardware number7E5169OF4VVS2
Software number10SW039513
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File keyff29d761c74c8e76
Identification read from the file
Read typeFull read (boot area included)
Bosch part / software10SW039513Offset in the file: 0x02001A
Software / calibration7E5169OOffset in the file: 0x03FE10
Bosch project identifier (EPK)30/1/MED17////7E5169O/F4VVS2//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7E5169OF4VVS2 and software number 10SW039513. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.5

HardwareSoftwareVehicles
5240601037524060Sea-Doo RXT-X
7A1124NA0RDS21037521129Sea-Doo RXP-X
7A1124OA0RDS11037524060Sea-Doo RXP-X
7A1128RA8FOS51037525858Sea-Doo Spark
7A1150QC7FOS41037550003Sea-Doo RXP
7E5173NK9VIS11037550003Can-Am MAVERICK
7F1124NB5RDS11037520674Sea-Doo Wake
VM7A170119U01037512885Sea-Doo RXP

Bosch ME17.8.5 original files

The Bosch ME17.8.5 unit page