Original file
Baic Mivec Bosch ME17.8.8 UE1714AH00
An original (stock) flash read of the Bosch ME17.8.8 control unit, fitted in Baic Mivec, software number UE1714AH00, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Baic Mivec1.5 136PS
- Control unit
- Bosch ME17.8.8
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Software number
- UE1714AH00
- Bosch part / software
- F01R0ADD9V
Technical data
| Brand | Baic |
|---|---|
| Car model | Mivec |
| Engine | 1.5 136PS |
| Fuel | Petrol |
| Control unit | Bosch ME17.8.8 |
|---|---|
| ECU maker | Bosch |
| Software number | UE1714AH00 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 28a683b8076b3bd8 |
| Read type | Calibration only (data set) | |
|---|---|---|
| Bosch part / software | F01R0ADD9V | Offset in the file: 0x02001A |
| Software / calibration | UE1714AH00 | Offset in the file: 0x020233 |
| Bosch project identifier (EPK) | 532/1/MED17////UE1714AH00/Dst00// | Offset in the file: 0x020233 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.8.8 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number UE1714AH00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.8.8
| Hardware | Software | Vehicles |
|---|---|---|
| Baic BJ20 | Baic BJ20 | |
| Chevrolet Sali | Chevrolet Sali | |
| Geely GS | Geely GS | |
| Great Wall HAVAL H2 | Great Wall HAVAL H2 | |
| Great Wall Haval H6 Coupe | Great Wall Haval H6 Coupe | |
| Mercedes-Benz A180 | Mercedes-Benz A180 | |