Original file

Hyundai i20 Bosch ME17.9.1 ECK451I_01 / ECK451M01

An original (stock) flash read of the Bosch ME17.9.1 control unit, fitted in Hyundai i20, hardware number ECK451I_01 and software number ECK451M01, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i201.2 petrol 86PS
Control unit
Bosch ME17.9.1
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
ECK451I_01
Software number
ECK451M01
Software / calibration
GAPB-CE52FS05500

Technical data

Vehicle
BrandHyundai
Car modeli20
Engine1.2 petrol 86PS
Power86.0PS / 63.3kW
Control unit
Control unitBosch ME17.9.1
ECU makerBosch
Hardware numberECK451I_01
Software numberECK451M01
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keye37b8b32b433e9f4
Identification read from the file
ECU nameME17.9.11
Read typeFull read (boot area included)
ProcessorTC1764
Software / calibrationGAPB-CE52FS05500Offset in the file: 0x03FE10
Internal build string17911001147 _CAN_VM_100_11_G.1.10Offset in the file: 0x012C50
Bosch project identifier (EPK)53/1/VM17/147/ME17.9.11//ECK451M01/GAPB_CE52FS05500//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ECK451I_01 and software number ECK451M01. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.1

Bosch ME17.9.1 original files

The Bosch ME17.9.1 unit page