Original file

Kia K3 Bosch ME17.9.11 GAYDCDP56QS01C00

An original (stock) flash read of the Bosch ME17.9.11 control unit, fitted in Kia K3, software number GAYDCDP56QS01C00, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia K31.6 128PS
Control unit
Bosch ME17.9.11
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Software number
GAYDCDP56QS01C00

Technical data

Vehicle
BrandKia
Car modelK3
Engine1.6 128PS
Power128.0PS / 94.1kW
Control unit
Control unitBosch ME17.9.11
ECU makerBosch
Software numberGAYDCDP56QS01C00
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key792b528ee9b20858
Identification read from the file
ECU nameME17.9.11
Read typeFull read (boot area included)
ProcessorTC1764
Software / calibrationGAYDCDP56QS01C00Offset in the file: 0x03FE10
Internal build string17911001147 _CAN_VM_100_11_G.1.10Offset in the file: 0x012C50
Bosch project identifier (EPK)53/1/VM17/147/ME17.9.11//ECGB51J01/GAYDCDP56QS01C00//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number GAYDCDP56QS01C00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.11

HardwareSoftwareVehicles
GAUB-FE62FF01500Kia Rio
GAYD-CE46FS01600Kia GAYD
GAYD-CE46QS01C00Kia GAYD CE46QS01C00
GAYDCDP46FS03600Kia cee`d, Kia K3
GCAM-BE46FS00600Kia GCAM
GCAM-BE46QS01C00Kia BE46QS01C00 stok, Kia GCAM BE46QS01C00
GCAM-DE46FS00600Kia GCAM
GCAM-DE46QS00C00Kia GCAM DE46QS00C00 stok

Bosch ME17.9.11 original files

The Bosch ME17.9.11 unit page