Original file

Renault Twingo Bosch ME17.9.20 0042141220 / 10SW004214

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Renault Twingo, hardware number 0042141220 and software number 10SW004214, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Twingo0.9 petrol
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0042141220
Software number
10SW004214
Vehicle maker's hardware number
0375821R
Software / calibration
r1780_870_

Technical data

Vehicle
BrandRenault
Car modelTwingo
Engine0.9 petrol
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0042141220
Software number10SW004214
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key763dba0ca36c9b94
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW004214Offset in the file: 0x02001A
Vehicle maker's hardware number0375821ROffset in the file: 0x00E906
Software / calibrationr1780_870_Offset in the file: 0x02E3C4
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_870_///Offset in the file: 0x02E3C4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0042141220 and software number 10SW004214. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW055815Smart ForFour
10SW056333Smart Forfour Brabus
10SW059348Renault Twingo
00033812201037551960Smart Forfour
004214122010SW0337051220_890Smart ForTwo
0061101220MCE2908TGLMRH13970173Smart ForTwo
008486122010SW0084861220_870Smart ForTwo
010013122010SW0100131220_A20Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page