Original file

Smart ForTwo Bosch ME17.9.20 0042141220 / 10SW0337051220_890

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0042141220 and software number 10SW0337051220_890, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 90PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0042141220
Software number
10SW0337051220_890
Bosch part / software
10SW033705
Software / calibration
2819023005

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9 90PS
FuelPetrol
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0042141220
Software number10SW0337051220_890
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key4f0cdea01ae5f468
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW033705Offset in the file: 0x02001A
Software / calibration2819023005Offset in the file: 0x2299C0
Data set number2819032306Offset in the file: 0x2299CB
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_890_///Offset in the file: 0x02E454

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0042141220 and software number 10SW0337051220_890. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW056333Smart Forfour Brabus
10SW059348Renault Twingo
00033812201037551960Smart Forfour
004214122010SW004214Renault Twingo
0061101220MCE2908TGLMRH13970173Smart ForTwo
008486122010SW0084861220_870Smart ForTwo
010013122010SW0100131220_A20Smart ForTwo
010013122010SW0123511220_A20Smart ForTwo Brabus

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page