Original file

Smart ForTwo Brabus Bosch ME17.9.20 0100131220 / 10SW0175741220_A20

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo Brabus, hardware number 0100131220 and software number 10SW0175741220_A20, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo Brabus0.9 · 109.0PS / 80.2kW
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0100131220
Software number
10SW0175741220_A20
Bosch part / software
10SW010013
Software / calibration
2819025904

Technical data

Vehicle
BrandSmart
Car modelForTwo Brabus
Engine0.9
FuelPetrol
Power109.0PS / 80.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0100131220
Software number10SW0175741220_A20
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key07e632a3080dd2fc
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW010013Offset in the file: 0x02001A
Software / calibration2819025904Offset in the file: 0x237396
Data set number2819034805Offset in the file: 0x2373A1
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A20_///Offset in the file: 0x02E75C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0100131220 and software number 10SW0175741220_A20. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
008486122010SW0084861220_870Smart ForTwo
010013122010SW0100131220_A20Smart ForTwo
010013122010SW0123511220_A20Smart ForTwo Brabus
010013122010SW0175721220_A20Renault Twingo
010982122010SW010982Smart ForTwo
0167371220016737Renault Twingo
016738122010SW016738Renault Twingo
01684412201037551187Smart Forfour, Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page