Original file

Smart ForTwo Bosch ME17.9.20 0109821220 / 10SW010982

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0109821220 and software number 10SW010982, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo1.0 70PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0109821220
Software number
10SW010982
Software / calibration
2819027404

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine1.0 70PS
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0109821220
Software number10SW010982
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key6bdee3cdd774f029
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW010982Offset in the file: 0x02001A
Software / calibration2819027404Offset in the file: 0x2299C0
Data set number2819036705Offset in the file: 0x2299CB
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_890_///Offset in the file: 0x02E454

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0109821220 and software number 10SW010982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
010013122010SW0100131220_A20Smart ForTwo
010013122010SW0123511220_A20Smart ForTwo Brabus
010013122010SW0175721220_A20Renault Twingo
010013122010SW0175741220_A20Smart ForTwo Brabus
0167371220016737Renault Twingo
016738122010SW016738Renault Twingo
01684412201037551187Smart Forfour, Smart ForTwo
016845122010SW016845Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page