Original file

Smart ForTwo Bosch ME17.9.20 0168451220 / 10SW016845

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0168451220 and software number 10SW016845, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 16HP
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0168451220
Software number
10SW016845
Software / calibration
2819020904

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9 16HP
FuelPetrol
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0168451220
Software number10SW016845
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyc168abec3b80f381
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW016845Offset in the file: 0x20001A
Software / calibration2819020904Offset in the file: 0x2299C0
Data set number2819038604Offset in the file: 0x2299CB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_890_///Offset in the file: 0x226BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0168451220 and software number 10SW016845. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
010982122010SW010982Smart ForTwo
0167371220016737Renault Twingo
016738122010SW016738Renault Twingo
01684412201037551187Smart Forfour, Smart ForTwo
0170781220017078Smart ForTwo
017078122010SW017078Smart ForTwo
017084122010SW017084Smart ForTwo
0175731220MCE0723TGLMRH90700173Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page