Original file

Smart ForTwo Brabus Bosch ME17.9.20 0175741220 / MCE8134TGLMRH01700173

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo Brabus, hardware number 0175741220 and software number MCE8134TGLMRH01700173, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo Brabus0.9 109PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0175741220
Software number
MCE8134TGLMRH01700173
Bosch part / software
10SW017574
Software / calibration
2819025904

Technical data

Vehicle
BrandSmart
Car modelForTwo Brabus
Engine0.9 109PS
FuelPetrol
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0175741220
Software numberMCE8134TGLMRH01700173
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keybcbdf219c2f783cf
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW017574Offset in the file: 0x20001A
Software / calibration2819025904Offset in the file: 0x237396
Data set number2819034805Offset in the file: 0x2373A1
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A20_///Offset in the file: 0x233F7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0175741220 and software number MCE8134TGLMRH01700173. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
0170781220017078Smart ForTwo
017078122010SW017078Smart ForTwo
017084122010SW017084Smart ForTwo
0175731220MCE0723TGLMRH90700173Smart ForTwo
020159009010SW053431Smart ForTwo
021578122010SW021578Smart ForTwo
023710574800563Renault Twingo
0261S129181037551934Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page