Original file

Smart ForTwo Bosch ME17.9.20 0201590090 / 10SW053431

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0201590090 and software number 10SW053431, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo1.0 90PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0201590090
Software number
10SW053431
Software / calibration
2819027306

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine1.0 90PS
Power90PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0201590090
Software number10SW053431
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
From the file nameL533CC0
File key8320ab00097beedc
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW053431Offset in the file: 0x02001A
Software / calibration2819027306Offset in the file: 0x22A20C
Data set number2819036707Offset in the file: 0x22A217
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x02E464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0201590090 and software number 10SW053431. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
017078122010SW017078Smart ForTwo
017084122010SW017084Smart ForTwo
0175731220MCE0723TGLMRH90700173Smart ForTwo
0175741220MCE8134TGLMRH01700173Smart ForTwo Brabus
021578122010SW021578Smart ForTwo
023710574800563Renault Twingo
0261S129181037551934Smart ForTwo
0261S1624710SW004214Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page