Original file

Smart ForTwo Bosch ME17.9.20 0261S16901 / 10SW012351

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0261S16901 and software number 10SW012351, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo1.0 petrol 109PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0261S16901
Software number
10SW012351
Software / calibration
2819027203

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine1.0 petrol 109PS
Power109.0PS / 80.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0261S16901
Software number10SW012351
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key9b9998edb005ca54
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW012351Offset in the file: 0x20001A
Software / calibration2819027203Offset in the file: 0x237396
Data set number2819034504Offset in the file: 0x2373A1
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A20_///Offset in the file: 0x233F7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S16901 and software number 10SW012351. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
023710574800563Renault Twingo
0261S129181037551934Smart ForTwo
0261S1624710SW004214Smart ForTwo
0261S1690110SW010013Smart ForTwo
0261S1690110SW012458Smart ForTwo
0261S1690110SW017572Renault Twingo
0261S1690110SW039992Renault Twingo
0261S1783310SW010982Smart Forfour

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page