Original file

Renault Twingo Bosch ME17.9.20 0261S16901 / 10SW039992

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Renault Twingo, hardware number 0261S16901 and software number 10SW039992, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Twingodiesel 109PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S16901
Software number
10SW039992
Vehicle maker's hardware number
0375821R
Software / calibration
r1780_A20_

Technical data

Vehicle
BrandRenault
Car modelTwingo
Enginediesel 109PS
Power109.0PS / 80.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0261S16901
Software number10SW039992
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keya4c151e3a46a401f
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW039992Offset in the file: 0x02001A
Vehicle maker's hardware number0375821ROffset in the file: 0x00E906
Software / calibrationr1780_A20_Offset in the file: 0x02E75C
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A20_///Offset in the file: 0x02E75C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S16901 and software number 10SW039992. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
0261S1690110SW010013Smart ForTwo
0261S1690110SW012351Smart ForTwo
0261S1690110SW012458Smart ForTwo
0261S1690110SW017572Renault Twingo
0261S1783310SW010982Smart Forfour
0261S2185210SW052860Smart ForTwo
0274811220MCE9044TGLMRH13810173Smart ForTwo
0274821220MCE0160TGLMRH53810173Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page