Original file

Smart ForTwo Bosch ME17.9.20 0274821220 / MCE0160TGLMRH53810173

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0274821220 and software number MCE0160TGLMRH53810173, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 · 90.0PS / 66.2kW
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0274821220
Software number
MCE0160TGLMRH53810173
Bosch part / software
10SW027482
Software / calibration
2819021505

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9
FuelPetrol
Power90.0PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0274821220
Software numberMCE0160TGLMRH53810173
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyc0a9f1054a2e4177
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW027482Offset in the file: 0x20001A
Software / calibration2819021505Offset in the file: 0x2299C0
Data set number2819030806Offset in the file: 0x2299CB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8A0_///Offset in the file: 0x226BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0274821220 and software number MCE0160TGLMRH53810173. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Smart ForTwoFlash2,560.00 KB€15Add to cart

All reads of 0274821220 / MCE0160TGLMRH53810173

Other pairs of Bosch ME17.9.20

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page