Original file

Smart ForTwo Bosch ME17.9.20 0407281220 / 10SW040728

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0407281220 and software number 10SW040728, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo1.0 · 70.0PS / 51.5kW
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0407281220
Software number
10SW040728
Software / calibration
2819028005

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine1.0
FuelPetrol
Power70.0PS / 51.5kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0407281220
Software number10SW040728
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key3ca0343ca6826783
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW040728Offset in the file: 0x20001A
Software / calibration2819028005Offset in the file: 0x22A208
Data set number2819037406Offset in the file: 0x22A213
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8D0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0407281220 and software number 10SW040728. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
0337181220MCE2908TGLMRH57810173Smart ForTwo
033739122010SW033739Smart ForTwo
038938122010SW0408191220_8D0Smart Forfour
0399921220MCE7712TGLMRH95430173Renault Twingo
0407391220040739Renault Twingo
04427312201037548380Renault Twingo
052423122010SW052423Smart ForTwo
052860122010SW052860Smart Roadster

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page