Original file

Renault Twingo Bosch ME17.9.20 0442731220 / 1037548380

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Renault Twingo, hardware number 0442731220 and software number 1037548380, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Twingo1.0
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0442731220
Software number
1037548380
Bosch part / software
10SW044273
Vehicle maker's hardware number
0375748R
Software / calibration
r1780_8D0_

Technical data

Vehicle
BrandRenault
Car modelTwingo
Engine1.0
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0442731220
Software number1037548380
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyac828c71bf0a673c
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW044273Offset in the file: 0x02001A
Vehicle maker's hardware number0375748ROffset in the file: 0x00E906
Software / calibrationr1780_8D0_Offset in the file: 0x02E464
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8D0_///Offset in the file: 0x02E464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0442731220 and software number 1037548380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
038938122010SW0408191220_8D0Smart Forfour
0399921220MCE7712TGLMRH95430173Renault Twingo
040728122010SW040728Smart ForTwo
0407391220040739Renault Twingo
052423122010SW052423Smart ForTwo
052860122010SW052860Smart Roadster
10SW0508401220_8E010SW050840Smart ForTwo
1780_890_10SW033789Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page