Original file

Smart ForTwo Bosch ME17.9.20 0524231220 / 10SW052423

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 0524231220 and software number 10SW052423, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 · 90.0PS / 66.2kW
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
0524231220
Software number
10SW052423
Software / calibration
2819026406

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9
FuelPetrol
Power90.0PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number0524231220
Software number10SW052423
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key4a1252bd990aef58
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW052423Offset in the file: 0x20001A
Software / calibration2819026406Offset in the file: 0x22A20C
Data set number2819035807Offset in the file: 0x22A217
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0524231220 and software number 10SW052423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
0399921220MCE7712TGLMRH95430173Renault Twingo
040728122010SW040728Smart ForTwo
0407391220040739Renault Twingo
04427312201037548380Renault Twingo
052860122010SW052860Smart Roadster
10SW0508401220_8E010SW050840Smart ForTwo
1780_890_10SW033789Smart ForTwo
1780_A70_10SW056336Smart ForTwo Brabus

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page