Original file

Renault Clio Bosch ME17.9.20 10SW004213

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Renault Clio, software number 10SW004213, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Clio1.0 71PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Software number
10SW004213
Vehicle maker's hardware number
0375748R
Software / calibration
r1780_870_

Technical data

Vehicle
BrandRenault
Car modelClio
Engine1.0 71PS
FuelDiesel
Power71.0PS / 52.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW004213
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key5fde682b3a5e45d0
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW004213Offset in the file: 0x02001A
Vehicle maker's hardware number0375748ROffset in the file: 0x00E906
Software / calibrationr1780_870_Offset in the file: 0x02E3C4
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_870_///Offset in the file: 0x02E3C4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW004213. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Renault TwingoFlash2,560.00 KB€15Add to cart
Renault TwingoFlash2,560.00 KB€15Add to cart
Smart ForFourFlash2,560.00 KB€15Add to cart
Renault twingo IIIFlash2,560.00 KB€15Add to cart
Renault TwingoFlash2,560.00 KB€15Add to cart

All reads of 10SW004213

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW000698Renault Twingo
10SW001903Renault Twingo
10SW003146Renault Twingo
10SW003300Renault Twingo
10SW004214Smart ForTwo, Smart TWINGO 3, Smart Twingo
10SW005510Renault Twingo
10SW005616Renault Twingo
10SW005635Renault Twingo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page