Original file

Smart ForTwo Bosch ME17.9.20 10SW009018

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, software number 10SW009018, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 petrol 90PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Software number
10SW009018
Software / calibration
2819023203

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9 petrol 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW009018
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key3974cfa556bff34e
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW009018Offset in the file: 0x20001A
Software / calibration2819023203Offset in the file: 0x2292F4
Data set number2819030004Offset in the file: 0x2292FF
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_870_///Offset in the file: 0x2264DC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW009018. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW006122Renault Twingo
10SW006145Smart ForTwo
10SW006664Smart Forfour
10SW008469Smart ForTwo
10SW010013Smart ForTwo, Smart Twingo, Renault
10SW010488Smart ForTwo
10SW010500Smart ForTwo
10SW010643Renault Twingo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page