Original file

Smart ForTwo Bosch ME17.9.20 10SW017574

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, software number 10SW017574, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwodiesel · 109.0PS / 80.2kW
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Software number
10SW017574
Software / calibration
2819025904

Technical data

Vehicle
BrandSmart
Car modelForTwo
Enginediesel
Fueldiesel
Displacement1.0
Power109.0PS / 80.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW017574
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key1981a9300e019522
Price€15
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW017574 0x20001A
Software / calibration2819025904 0x237396
Data set number2819034805 0x2373A1
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A20_/// 0x233F7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW017574. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizeFrom the file nameContentsPriceAdd to cart
Smart ForTwo2,560.00 KBFlash€15Add to cart

All reads of 10SW017574

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW017083Smart ForTwo
10SW017084Smart Forfour
10SW017128Smart ForTwo
10SW017372Smart ForTwo
10SW018733Renault Twingo
10SW021512Smart Forfour
10SW021578Smart ForTwo
10SW027368Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page