Original file

Smart Forfour Bosch ME17.9.20 10SW021512

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart Forfour, software number 10SW021512, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart Forfour1.0 petrol 71PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Software number
10SW021512
Software / calibration
2819027504

Technical data

Vehicle
BrandSmart
Car modelForfour
Engine1.0 petrol 71PS
Power71.0PS / 52.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW021512
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyabf7876cffa7dc14
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW021512Offset in the file: 0x20001A
Software / calibration2819027504Offset in the file: 0x2299C0
Data set number2819036805Offset in the file: 0x2299CB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_890_///Offset in the file: 0x226BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW021512. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW017128Smart ForTwo
10SW017372Smart ForTwo
10SW017574Smart ForTwo
10SW018733Renault Twingo
10SW021578Smart ForTwo
10SW027368Smart ForTwo
10SW027406Renault Twingo
10SW027482Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page