Original file

Smart ForTwo Bosch ME17.9.20 10SW0508401220_8E0 / 10SW050840

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 10SW0508401220_8E0 and software number 10SW050840, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
10SW0508401220_8E0
Software number
10SW050840
Software / calibration
2819025306

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number10SW0508401220_8E0
Software number10SW050840
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key7a22d401ecc46719
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW050840Offset in the file: 0x20001A
Software / calibration2819025306Offset in the file: 0x22A20C
Data set number2819034707Offset in the file: 0x22A217
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW0508401220_8E0 and software number 10SW050840. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
0407391220040739Renault Twingo
04427312201037548380Renault Twingo
052423122010SW052423Smart ForTwo
052860122010SW052860Smart Roadster
1780_890_10SW033789Smart ForTwo
1780_A70_10SW056336Smart ForTwo Brabus
281902110410SW017083 1220_890Smart ForTwo 0,9T
281902590410SW017574 1220_A20Smart ForTwo 0,9 T

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page