Original file

Smart ForTwo Bosch ME17.9.20 10SW051023

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, software number 10SW051023, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Software number
10SW051023
Software / calibration
2819025806

Technical data

Vehicle
BrandSmart
Car modelForTwo
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW051023
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keycd9cee5305e46ebd
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW051023Offset in the file: 0x20001A
Software / calibration2819025806Offset in the file: 0x22A20C
Data set number2819035207Offset in the file: 0x22A217
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW051023. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW044273Renault Twingo
10SW044865Smart ForTwo
10SW044973Smart ForFour
10SW050843Smart ForTwo
10SW052141Smart ForTwo
10SW052272Smart ForFour, Smart Forfour, Smart ForTwo
10SW052423Smart
10SW052860Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page