Original file

Smart Bosch ME17.9.20 10SW052423

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart, software number 10SW052423, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart90PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Software number
10SW052423
Software / calibration
2819026406

Technical data

Vehicle
BrandSmart
Engine90PS
Power90PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Software number10SW052423
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyfc1842ff66b8b5a3
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW052423Offset in the file: 0x02001A
Software / calibration2819026406Offset in the file: 0x22A20C
Data set number2819035807Offset in the file: 0x22A217
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x02E464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW052423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
10SW050843Smart ForTwo
10SW051023Smart ForTwo
10SW052141Smart ForTwo
10SW052272Smart ForFour, Smart Forfour, Smart ForTwo
10SW052860Smart ForTwo
10SW053293Smart Forfour
10SW053431Smart ForTwo
10SW055812Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page